Are you considering purchasing a C-Arm for your pain management centre? Do you know what points must be considered before purchasing one? Are you aware of the refurbished C-Arms available in the market?
Well, if you have not yet purchased a C-Arm, but are looking forward to get one, here are a few handy tips. C-Arm is necessary equipment for any pain management practice. For sure, purchasing one is an expensive undertaking, but by picking the right equipment you can make the most out of it.
Three vital points to consider:
Sharpness:
The resolution of different C-Arms is different. Some might offer you 525 lines per inch while some may offer 1000 lines per inch. More lines means sharper images. Now, the thing is before settling for a particular resolution, you must consider the procedures you look forward to perform. This is because not all procedures need high resolution equipment. You can go through the resolution quality of different models available with pacific health USA and decide which one suit you best.
Size:
Size does matter, especially in the case of a C-Arm system. The four different types of C-Arms based on size are:
- Mini C-Arms: These are one-piece system ideal for scanning hands, feet, ankle, shoulder, etc.
- Compact C-Arms: These are larger in size compared to the mini C-arms. This type of system can be a one-piece or two-piece. The best thing about a compact C-arm is its mobility. You can easily move it around the room and use it when and where you need.
- Full size C-Arms: This is one of the greatly preferred models. With this system you can do any and every type of procedure. The open space is about 26 inches, which is big enough to fit a table as well as a patient.
- Super C C-Arms: In simple words, these are the biggest ones. The open space is about 33 inches. This system gives you enough space to even accommodate a table and an obese patient.
Warranty Plan:
Last, but not the least, a good warranty plan is crucial. After all, you are not going to purchase a whole new system every now and then. Make sure that the system you purchase has a warranty plan covering its parts replacement and labor charges.
The two most expensive parts of the system are X-ray tube and image intensifiers. Most vendors will offer you a warranty plan which will be excluding these two parts in particular and usually buyers don’t even bother about it. Well, just like any other part of the system, even these two will need regular check up and servicing. So it is wise to make sure your plan includes them. However, if it doesn’t discuss the same with the vendor and make necessary amendments in your warranty plan.
So, looks like all the necessary points concerning buying a C-Arm are covered here. However, if you still have any queries, feel free to discuss them with your vendor. A genuine vendor will definitely have answers to all your questions.