The sun radiates in United States as effectively as, for example, in Germany, whose electricity consumption is covered by already 5% by solar energy, and by 2050 25%. Also in USA, the use of solar electricity is therefore sensible: modern manufactured silicon solar panels are maintenance-free and efficient, so after the initial investment in the production of electricity is free.
Become an Electricity Producer and Earns
At best, solar power systems can run when photovoltaic solutions for residential solar panels houses, business establishments and farms to be installed is connected directly to the power grid, can solar electricity surplus production to sell Electricity Company. We help diagnose and obtaining any permits and install the equipment guaranteed to be in accordance with the requirements of the electricity companies.
Solar Electricity Self-sufficiency in the Home, to the Company and Ranch
Solar power is a viable energy source for anyone who wants to increase their self-reliance and to reduce the external formed on the purchase of energy costs. Photovoltaic is also a future form of energy – the sun still radiates about five billion years, and its exploitation would impose any kind of negative effects on our environment. New times the solar panels are correctly installed on the Finnish weather-resistant and completely maintenance-free, and their power decline over the decades either.
Use the Advantage of Energy Subsidies
Businesses and farms receive support in taking the energy to produce solar electricity. Renewable energy production, the initial investment can be up to one-third covered by aid. We are happy for you, deciphering and retrieving any such aid.
Solar Panels
The solar panels produced by cells made from silicon. Multi-step manufacturing process for solar panels are made partly by hand. Elemental silicon solar panels will bring their bluish color and a metallic luster. The cells are semiconductors, and solar lights will change in the cell directly into electric current. Sensors connected to the solar panels in series. The structure of the polycrystalline silicon designs appear on individual silicon crystals on the surface of the cell, and soldered wires. Born in solar electrical power can be derived from the external load wire, by radio. Polycrystalline silicon cells can be made of square blanks, in which case the raw material can be used further for the benefit of the single crystal cells. Polycrystalline silicon cells are clearly visible individual crystals, as opposed to the single-crystal cell. Mon crystalline cell also identifies the round corners. Silicon crystals standing state thanks to the solar panels are maintenance-free and remain effective for decades. The same silicon raw material is also used in the electronics industry.
Solar panels should invest in the place, which is a shadow throughout the day. The most important thing is to place the panels in place, which will be the most sunlight. Solar panels should not be put so that the access panel or any of its cells will remain close to any obstacle, such as a building, a tree branch or the eaves shade. Suitable mounting locations include. Ceiling, wall and beach. If the panels are fastened to the wall of the house, must ensure that the eaves shade the panels, even when the sun is at its highest in the summer.
If the solar panels placed on the roof, they must be fitted close to the roof ridge. No eaves, where they act as an obstacle to snow. The panels can also be placed in an upright position. Finnish latitudes to the horizontal favorable tilt angle varies according to season between 10˚- 90˚. As a rule, the solar panels should be directed to the south, but the panels also serve as a satisfactory trend in the sector of southeast lunch. If the roof cannot find a place where the sun shines freely to 6 hours during the day, it is better to install the panels of up to 50 meters away from the house to the roof of the trees in the shade.
